Ricoh G147 - Paper End;Paper Height;Relay Sensors; Registration Sensor

SM 3-35 G147
Replacement
Adjustment
3.10.6 PAPER END/PAPER HEIGHT/RELAY SENSORS
1. Remove the appropriate paper feed unit. (See ‘Upper Paper Feed Unit’ or ‘Lower
Paper Feed Unit’.)
2. Paper height sensor [A] (
x1)
3. Paper end sensor [B] (
x1).
4. Relay sensor bracket [C] (
x1, x1)
5. Relay sensor [D]
3.10.7 REGISTRATION SENSOR
1. Remove:
 Front door (See ‘Covers and Common Units – Front Door’.)
 Rear upper cover (See ‘Covers and Common Units – Rear Covers’.)
 Right upper cover (See ‘Covers and Common Units – Right Upper Cover’.)
 Transfer belt unit (See ‘Transfer Unit’.)
 PCU (See ‘Photoconductor Unit’.)
 Development unit (See ‘Development’.)