Ricoh G147 - Jam Detection

JAM DETECTION
G838 16 SM
2.2 JAM DETECTION
Mode
Shift Staple
Jam Content
9 9
Entrance sensor:
On check
The entrance sensor does not turn on within
399 pulse after the main machine exit
sensor turns off.
*1
9 9
Entrance sensor:
Off check
The entrance sensor does not turn off within
34 pulse after it turns on.
*1
9
Tray exit sensor:
On check
The tray exit sensor does not turn on within
66 pulse after the entrance sensor turns off.
*1
9
Tray exit sensor:
Off check
The tray exit sensor does not turn off within
66 pulse after the tray exit sensor turns on.
9
Stapler tray
entrance sensor:
On check
The stapler tray entrance sensor does not
switch on within 102 pulses after the
entrance sensor switched off.*
1
9
Stapler tray
entrance sensor:
Off check
The staple tray entrance sensor does not
turn off within 34 pulse after the stapler tray
entrance sensor turns on.*
1
9
Lower tray exit
sensor:
On check
The lower exit sensor does not on within
1260 ms after the stack feed-out motor turns
on.
9
Lower tray exit
sensor:
Off check
The lower exit sensor does not off within
1500 ms after it turns on.
*1
Counted by entrance motor pulses because timing differs for feed out.