SM 5-115 G147
Service
Tables
5.9 UPLOADING/DOWNLOADING NVRAM DATA
The content of the NVRAM can be uploaded to and downloaded from an SD card.
5.9.1 UPLOADING NVRAM DATA
1. Turn off the power switch.
2. Remove the SD card cover [A].
3. Insert the SD card [B] into SD card slot C3.
4. Turn on the machine.
5. To enter the SP mode, press "$ together (for 5 seconds), release, then press
[#Enter].
6. Select SP5824.
SP5824
NVRAMUpload
7. Push [#Enter].
8. When the message prompts you to execute, push [#Enter].
<NVRAMUpload>
Processing
<NVRAMUpload>
result = OK
9. Remove the SD card.
To Next Page
Loading...
