G147 6-38 SM
When the paper tray is set into the machine, it pushes the release lever [E]. This causes the
pick-up roller [D] to go down and the separation roller [B] to move up and contact the paper
feed roller.
6.9.4 PAPER LIFT
The paper size switch [1] detects when the paper tray [2] is set in the machine, and the tray
lift motor [3] rotates, and the coupling gear [4] on the tray lift motor engages the pin [5] on the
lift arm shaft [6]. Then the tray lift arm [7] lifts the tray bottom plate [8].
To Next Page
Loading...
