G147 5-116 SM
10. Switch the machine off and on.
5.9.2 DOWNLOADING NVRAM DATA
The following data are not downloaded from the SD card:
C/O, P/O Counter (SP7-006-** C/O, P/O Count Display)
Duplex, A3/DLT/Over 420 mm.
1. Turn off the machine.
2. Remove the SD card cover [A].
3. Plug the SD card [B] into SD card slot C3.
4. Turn on the machine.
5. To enter the SP mode, press "$ together (for 5 seconds), release, then press
[#Enter].
6. Select SP5824.
SP5825
NVRAMDownload
7. Push [#Enter].
8. When the message prompts you to execute, push [#Enter].
<NVRAMDownload>
Processing
<NVRAMDownload>
result = OK
9. Remove the SD card.
To Next Page
Loading...
