Ricoh G147 - Paper Output Tray

G147 3-8 SM
3.5 PAPER OUTPUT TRAY
No Bridge Unit Installed
1. Sub copy tray [A]
2. Paper sensor ass’y [B] (
x 2)
3. Cover [C] (
x 1)
4. Paper output tray [D] (
x 3)
5. If the duct on the bottom of the paper output tray base hangs up on the vertical
support [E] below, reach under and pull the duct up over the support.
Bridge Unit Installed
1. Bridge unit [A] (
x 2, x 2)
2. Paper output tray [B] (
x 3)