Ricoh G147 - Idle Roller Dust Blade; Registration Roller Dust Blade

G147 3-40 SM
5. Support [A] ( x2, harnesses x2)
6. Timing belt [B] (Raise arm to release tension on belt.)
7. Feed/development motor [C] (
x3, x2)
3.10.10 IDLE ROLLER DUST BLADE
1. Open the duplex unit and right door.
2. Detach the dust blade [A].
3. Spread some paper on a flat surface. Tap the dust blade gently to remove paper
dust collected in its dust box.
3.10.11 REGISTRATION ROLLER DUST BLADE
1. Open the front door.
2. Lower the by-pass tray, open the duplex unit, and open the transfer unit right
cover.
3. Release the PCU lock [A].