Ricoh G147 - Two-Tray Finisher (G838); Accessory Check: Two Tray Finisher; Installation Procedure: Two-Tray Finisher

SM 1-13 G147
Installation
1.6 TWO-TRAY FINISHER (G838)
1.6.1 ACCESSORY CHECK: TWO TRAY FINISHER
Check the quantity and condition of the accessories in the box against the following list:
No. Description Q’ty
1. Front Joint Bracket 1
2. Rear Joint Bracket 1
3. Shift Tray 2
4. Screw – M4 x 8 2
5. Screw – M4 x 12 5
6. Ground Plate 1
7. Installation Procedure 1
1.6.2 INSTALLATION PROCEDURE: TWO-TRAY FINISHER
 Unplug the main machine power cord before starting the following procedure.
 The bridge unit (B538) and paper tray unit (G839) must be installed before installing
this finisher.