Ricoh G147 - Printing the Test Pattern

G147 5-92 SM
6. Press $ to display “Test T Pattern”
SP2902
Print T Pattern
7. Press [#Enter].
<Print Pattern>
*0:None
 The asterisk (*) shows the current selection.
8. Press $ to display the name of the pattern that you want to print.
<Print Pattern>
5:Grid Pat. 1
9. Press [#Enter] to mark the selection with an asterisk.
<Print Pattern>
*5:Grid Pat. 1
10. Press [Escape] twice.
<Engine>
2. Drum
The printer is now in the Test Pattern Print mode. To print the pattern, you must do
SP5990.
5.3.2 PRINTING THE TEST PATTERN
Do SP5990 to print the test pattern.
1. After selecting the test pattern selected as described above, press "$ to display
"5. Mode2.
<Engine>
5. Mode
2. Push [#Enter].
SP5024
mm/inch Display
3. Push $ once.