Ricoh G147 - By-Pass Separation Roller

G147 3-50 SM
1. Upper cover (See ‘Covers’.)
2. Lift up paper end feeler [A] to lock the feeler in position.
 Before reinstalling the upper cover, return the paper end feeler to its original
position.
3. Replace the paper feed roller [B] (
x1)
4. Replace the pick-up roller [C].
3.12.3 BY-PASS SEPARATION ROLLER
1. Close the by-pass table.
2. Remove the separation roller [A] from the bottom (
x1)