G147 3-46 SM
4. Center thermistor [A] ( x1, x1, holder x1)
5. End thermistor [B] (
x1, x1, holder x1)
The thermistors are thinly coated and extremely fragile. Handle with care to
avoid damaging them. They should be replaced every 150K.
6. Center thermostat [C] (
x2)
7. End thermostat [D] (
x2)
3.11.6 HOT ROLLER/PRESSURE ROLLER
1. Fusing unit (See ‘Fusing Unit Removal’.)
2. Fusing unit upper cover (See ‘Hot Roller Strippers’.
3. Fusing unit lower cover. (See ‘Fusing Lamps’.)
4. Fusing lamps. (See ‘Fusing Lamps’.)
To Next Page
Loading...
