G147 5-46 SM
-2394 Device not managed
-2395 Box ID for Basil is illegal
-2396 Device ID for Basil is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
209 Instl Clear
NIA
250 CommLog Print
Prints the communication log.
5821 Remote Service A
Remote Service Address Japan Only
001 CSS-PI Device C(ode)
Sets the PI device code. After you change this
setting, you must turn the machine off and on.
002 RCG IP Address
Sets the IP address of the RCG (Remote
Communication Gate) destination for call
processing at the remote service center.
[00000000h~FFFFFFFFh/1]
5824 NVRAM Upload
Uploads the UP and SP mode data (except for counters and the serial number)
from NVRAM on the control board to an SD card
Note: While using this SP mode, always keep the front cover open. This prevents
a software module accessing the NVRAM during the upload.
5825 NVRAM Download
Downloads data from an SD card to the NVRAM in the machine. After
downloading is completed, remove the card and turn the machine power off and
To Next Page
Loading...
