SM 5-57 G147
Service
Tables
Bluetooth Mode
5851
Sets the operation mode for the Bluetooth Unit.
*Public Private
Note: This printer does not support the use of Bluetooth at this time (April 2006)
5856 Remote ROM Update
When set to “1” allows reception of firmware data via the local port (IEEE 1284)
during a remote ROM update. This setting is reset to zero after the machine is
cycled off and on.
[0~1 / 0 / 1]
0: Not allowed
1: Allowed
5857 Save Debug Log
On/Off
001
(1:ON 0:OFF)
Switches on the debug log feature. The debug log cannot be captured until this
feature is switched on.
[0~1/1]
0: OFF
1: ON
Target
002
(2: HDD 3: SD Card)
Selects the destination where the debugging information generated by the
event selected by SP5858 will be stored if an error is generated
[2~3 /1]
2: HDD
3: SD Card
Save to HDD
005
Specifies the decimal key number of the log to be written to the hard disk.
To Next Page
Loading...
