SM 5-61 G147
Service
Tables
This SP sets the amount of time to allow for the connection to the SMTP server
after the transmission has connected to the POP server and been certified during
the execution of POP Before SMTP.
[0~10000/300/1]
Rcv Protocol Receive (RX) Protocol
009
This SP specifies POP3 protocol or switches off receiving.
0: No receiving
1: POP3 protocol
POP Auth Encrypt POP3/IMAP4 Certification Encryption
013
This SP specifies whether password encryption is done for POP3/IMAP4
certification.
0: Automatic
1: No encryption done
2: Encryption done
POP Srv Port No POP3 Server Port Number
014
This SP sets the number of the POP3 server port.
[1~65535/110/1]
IMAP Srv Port No IMAP4 Server Port Number
015
This SP sets the number of the IMAP4 server port.
[1~65535/143/1]
SMTP Rcv Port No SMTP RX Port Number
016
This SP sets the number of the port that receives SMTP mail.
[1~65535/25/1]
Receive Interval Mail RX Interval
017
This SP sets the timing for mail received at regular intervals.
[2~1440/15/1 min.]
Note: Setting this SP to "0" switches off receiving mail at timed intervals.
019 Mail Keep Sett. Server Mail Storage Setting
To Next Page
Loading...
