G147 5-78 SM
specified by the application.
O:FIN Jobs [0~9999999/ 0 / 1]
8067
These SPs total finishing methods for jobs executed by an external application
over the network. The finishing method is specified by the application.
806x 1 Sort
Number of jobs started in Sort mode. When a stored copy job is set for
Sort and then stored on the document server, the L: counter
increments. (See SP8066 1)
806x 2 Stack Number of jobs started out of Sort mode.
806x 3 Staple Number of jobs started in Staple mode.
806x 4 Booklet
Number of jobs started in Booklet mode. If the machine is in staple
mode, the Staple counter also increments.
806x 5 Z-Fold
Number of jobs started In any mode other than the Booklet mode and
set for folding (Z-fold).
806x 6 Punch
Number of jobs started in Punch mode. When Punch is set for a print
job, the P: counter increments. (See SP8064 6.)
806x 7 Other Reserved. Not used.
T:Jobs/PGS [0~9999999/ 0 / 1]
8071
These SPs count the number of jobs broken down by the number of pages in
the job, regardless of which application was used.
P:Jobs/PGS [0~9999999/ 0 / 1]
8074
These SPs count and calculate the number of print jobs by size based on the
number of pages in the job.
O:Jobs/PGS [0~9999999/ 0 / 1]
8077
These SPs count and calculate the number of “Other” application jobs (Web
Image Monitor, Palm 2, etc.) by size based on the number of pages in the job.
807x 1 1 Page 807x 8 21~50 Pages
To Next Page
Loading...
