Ricoh G147 - Page 279

SM 5-89 G147
Service
Tables
Machine Status [0~9999999/ 0 / 1]
8941
These SPs count the amount of time the machine spends in each operation
mode. These SPs are useful for customers who need to investigate machine
operation for improvement in their compliance with ISO Standards.
001
Operation
Time
Engine operation time. Does not include time while controller
is saving data to HDD (while engine is not operating).
002 Standby Time
Engine not operating. Includes time while controller saves
data to HDD. Does not include time spent in Energy Save
mode.
003
Energy Save
Time
Includes time while the machine is performing background
printing.
004
Low Power
Time
Includes time in Energy Save mode with Engine on. Includes
time while machine is performing background printing.
005 Off Mode Time
Includes time while machine is performing background
printing. Does not include time machine remains powered off
with the power switches.
006 SC Total down time due to SC errors.
007 PrtJam Total down time due to paper jams during printing.
009 PM Unit End Total down time due to toner end.
8999 Admin Counter Machine Administration Counter
This SP displays the counts for the items listed below. Use this SP as a quick
reference to see the total counts of the corresponding SP codes listed below.
Note: This machine supports K printing only, so the counts for 015 and 017
are identical.
001 Total (SP8381 001) Total output (sheets fed out from the machine).
012 A3/DLT (SP8391 001) Total output for large size paper.
013 Duplex (SP8411 001) Total output of duplexed sheets.