G147 7-2 SM
Image Transfer
Method:
Belt
Paper Separation: Curvature method (assisted by stripper pawls)
Drum Charge: Charge roller system
Drum Cleaning: Counter blade (x1)
Drum Quenching: QL LED
Fusing Method: Hot roller (fusing lamps x 2), pressure roller
Exposure Method: Dual laser beam system
PCU (PCDU) Combined unit (PCU + Development Unit)
Development
Method:
Dual component toner using 1-step SLIC development method
(with toner recycling)
Developer Density
Control Method
TD sensor/ID sensor feedback
Toner Supply: Toner bottle with spiral grooves
Power Source: 220 ~ 240 V, 50/60 Hz, 8 A or more
120 V, 60 Hz, 12 A or more
120 V (NA) 220 ~ 240 V
(EU/ASIA)
Maximum 1,400 W or less 1,450 W or less
Printing 850 W or less 870 W or less
Power Consumption
Energy Saver 6 W or less 6 W or less
Printing 70 dB (A) 74 db (A) Sound Power Level
Standby 42 dB (A) 42 dB (A)
The above measurements were made in accordance with ISO 7779 at the
operation position.
“Full System” includes the printer with a finisher and large capacity tray (LCIT)
To Next Page
Loading...
