User primary message Explanation
39 Complex Page
This message is displayed when a page is too complex to print.
The following actions can be taken:
•
Press "Select" ( ) to clear the message and continue printing.
The job may not print correctly.
• Simplify the print job.
• Press "Menus" ( ) to access the Busy/Waiting Menu.
The following functions may be available:
-Cancel Job
-Reset Printer
• Menu Lockout does NOT prevent access to the Busy/Waiting
Menu.
50 PPDS Font Error
This error only occurs when a machine is formatting PPDS print data.
The PPDS interpreter has detected a font error. When a specific font,
which is not installed, is requested based on a PPDS mode Set Font
Global command, a Select Code Page command, or a
Comprehensive Font Selection command, and the printer Best Fit
setting is off. If Best Fit is on, the machine performs a best fit search to
find a similar font, and this error does not occur.
This error also displays when the machine receives invalid PPDS
download font data.
The following actions can be taken while this message is displayed:
•
Press "Select" (
) to clear the message and continue printing.
The job may not print correctly.
•
Press "Menus" (
) to access the Busy/Waiting Menu.
The following functions may be available:
-Cancel Job
51 Defective Flash Detected
Press "Select" (
) to clear the message and continue printing.
You must install different flash memory before you can download any
resources to flash.
6. Troubleshooting
204
To Next Page
Loading...
