5. When “operation complete” is displayed, press "Close”.
• If installation fails, "Failed" is displayed.
• If installation fails, perform the following steps.
1. Check whether it is a used SD card.
2. Switch the power OFF, and repeat steps 1-5.
6. Switch the power OFF/ON.
7. Press “Enter” in SP5-878-004 (Option Setup: OCR Dictionary).
Dictionary data is copied to the HDD.
• On the first run, SP5-878-004 links the SD card, and on the second run, copies dictionary
data.
8. Switch the power OFF, and remove the SD card from the SD card slot.
• Keep the SD card in the SD card storage location of the MFP. The original SD card is needed
in the event of a HDD malfunction.
9. Return the SD card slot cover to the original position.
10. Switch the power ON.
11. Press [File Format / File Name] on the scanner function screen.
12. Check that [OCR setting] is displayed on the “File format / "File Name" screen.
• After installation, the OCR setting can be changed on the "OCR setting" screen.
• When setting OCR, set [OCR setting] to [Yes]. (Default setting: [No])
OCR Unit Type M2
201
To Next Page
Loading...
