Ricoh MET-C1 - Page 429

SP2-194-010,
011, 012 shows
"2" or "3"
Result of Check Blank image, abnormal image, low image density
Causes
1. Image Processing failure
2. Pattern density low
3. BCU(IPU) failure
Solution
1.Replace PCU, Intermediate Transfer Belt, Power
pack
2. Execute process control, supply toner
3. Replace BCU(IPU)
Pattern -
Failed to read the
pattern of Line
position Adj.
Result of Check Normal (but color registration errors occur)
Causes
1. ID Sensor shutter failure
2. ID Sensor failure
3. BCU(IPU) failure
Solution
1. Replace ID Sensor shutter
2. Replace ID Sensor
3. Replace BCU(IPU)
Pattern -
Image Adjustment
427