SC No. Level Error Name/Error Condition/Major Cause/Solution
SC503-36 B
3rd Tray Transfer HP Error (LCIT)
• HP detection error (during transfer start)
At right tray paper end (right tray lower limit detection, left tray paper
detection), left tray paper is transferred to the right tray, but the left tray
transfer fence HP sensor is detected although a predetermined time
elapsed (HP sensor missing cannot be detected)
• HP detection error (during transfer fence HP return)
During left tray transfer fence HP not detected (stop after paper transfer,
during power supply ON, during left tray set), the left tray transfer fence
is moved to HP, but the left tray HP sensor is not detected although a
predetermined time elapsed.
*If an error occurs 3 times consecutively: LCIT transmits "3rd paper feed
tray transfer HP error" to the main machine.
(Up to 2 times consecutively, LCIT transmits "tray set fault" to the main
machine)
Service Call 501-584
489
To Next Page
Loading...
