SC No. Level Error Name/Error Condition/Major Cause/Solution
• Transfer motor error/connector missing
• Left tray transfer fence HP sensor error/connector missing
• Harness broken
• Bank control board defective
• Paper overload
• Foreign matter, such as paper scrap, is caught between the left tray
and the tray transport motor
• Paper set fault
• Timing belt damage/dropout
• Timing pulley damage/dropout
• Transfer fence defective
• Foreign matter, such as paper scrap, is caught inside the left tray
• Replace the motor
• Reset the connector
• Replace the harness
• Replace the sensor
• Replace the control board for the optional paper feed tray
• Reset the paper
• Remove the foreign matter
• Replace the tray
• Replace the timing belt
• Replace the timing pulley
• Replace the end fence of the left tray
5. Troubleshooting
490
To Next Page
Loading...
