SC No. Level Error Name/Error Condition/Major Cause/Solution
SC505-42 B
Side LCIT Lower Limit Detection Error
• Lower limit detection error (during descent)
During tray initialization (upper limit not detected /lower limit eject
detection), the tray base plate is lowered to check the tray base plate
position, but the lower limit sensor is not detected although a
predetermined time elapsed.
Alternatively, at paper end, the tray base plate is lowered, but the lower
limit sensor is not detected although a predetermined time elapsed.
• Lower limit detection error (during ascent)
During tray initialization (upper limit not detected/lower limit detection),
the tray base plate is raised to check the tray base plate position, but the
lower limit sensor is detected although a predetermined time elapsed.
*If an error occurs for 3 times consecutively: the side LCIT transmits a "5th
paper feed tray upper limit detection error" to the main machine.
Up to 2 times consecutively, the side LCIT transmits a "tray set fault" to the
main machine.
Service Call 501-584
495
To Next Page
Loading...
