SC No. Level Error Name/Error Condition/Major Cause/Solution
SC505-43 B
Side LCIT Paper Overload Error
During tray initialization, both the upper limit and lower limit are detected
for 3 times consecutively (up to 2 times consecutively, the side LCIT
transmits a "tray set fault" to the main machine.
• Paper overload
• Paper set fault
• Limit sensor error/connector missing
• Lower limit sensor error/connector missing
• Harness broken
• Bank control board defective
• Foreign matter, such as paper scrap, is caught inside the tray
• Reset the paper
• Remove the foreign matter
• Reset the connector
• Replace the harness
• Replace the sensor
• Replace the control board for the optional side LCT
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC520-01 C Registration Motor: Lock
SC520-02 C Paper feed Motor: Lock
SC520-03 C Transport Motor: Lock
Service Call 501-584
497
To Next Page
Loading...
