Ricoh Printer/Scanner Unit Type 8000 Network Guide

Remote Maintenance by telnet
83
2
psk "character
string"
You can specify the
Pre-Shared key.
Usable characters:
ASCII 0x20-0x7e (8
to 63 bytes).
The default is
blank.
eap
{tls|ttls|leap|pea
p}{chap|msc-
hap|mschapv2|p
ap|md5|tls}
You can specify
the EAP authenti-
cation type.
tls: EAP-TLS (de-
fault)
ttls: EAP-TTLS
leap: LEAP
peap: PEAP
chap, mschap,
mschapv2, pap,
md5, or tls are set-
tings forthe phase
2 method, and
must be set when
using EAP-TTLS
orPEAP.
Do not make these
settings when us-
ing other EAP au-
thentication types.
If you select EAP-
TTLS, you can se-
lect chap, mschap,
mschapv2, pap, or
md5.
If you select PEAP,
you can select
mschapv2 or tls.
username "charac-
ter string"
You can specify
the login user
name for the Radi-
us server.
Usable characters:
ASCII 0x20-
0x7e(31 bytes) oth-
er than"@". The de-
fault is blank.
Parameter Value configured
username2 "char-
acter string"
You can specify
the phase 2 user-
name for EAP-
TTLS/PEAP phase
2 authentication.
Usable characters:
ASCII 0x20-0x7e
(31 bytes) other
than"@". The de-
fault is blank.
domain "character
string"
You can specify
the login domain
name for the Radi-
us server.
Usable characters:
ASCII0x20-0x7e
(31 bytes) other
than"@". The de-
fault is blank.
password "charac-
ter string"
You can specify
the login password
for the Radius
server.
Usable characters:
ASCII 0x20-
0x7e(128 bytes).
The default is
blank.
srvcert {on|off} You can set the
server certifi-
cate.The default is
"off".
imca {on|off} You can enable or
disable the certifi-
cate when the in-
termediate
certificate authori-
ty is present. The
default is "off".
srvid "character
string"
You can set the
server ID and sub-
domain of the cer-
tificate server.
Parameter Value configured

Ricoh Printer/Scanner Unit Type 8000 Specifications

General

Brand	Ricoh
Model	Printer/Scanner Unit Type 8000
Category	All in One Printer
Language	English