1.Detailed Descriptions
27
When the operation starts after power is switched on, or the front door opens and closes, the Main
Controller Board (PCB1) drives the Booklet Stapler Transfer Motor (STM7) [B] to return the stapler unit
to the home position.
The stapler unit starts to transfer the paper to the front side of the stapler frame, and when the Booklet
Stapler HP Sensor (S7) [C] under the stapler unit detects the screen, it temporarily stops. Then, the
Booklet Stapler Transfer Motor (STM7) is driven for a predetermined number of pulses. The stapler unit
moves to the rear side, and stands by.
To prevent the stapler unit colliding with the feedout pawl and trailing edge fences, a Stapler Retreat
Sensor (S6) is provided.
Edge binding mode (one position):
Edge binding mode (two positions):
To Next Page
Loading...
