Before Starting to Use
Preparing to Print
23
Note:
• When closing the Paper Receiving Tray, first
slide the Paper Stopper to the edge of the tray
and fold it inward. Then widen the Receiving
Tray Paper Guides with the Paper Arrangers
closed and fold the guides inward. Lastly close
the Paper Receiving Tray.
6 Set the corrugators.
(For EZ2XX only)
Lower the corrugators to the inside of the Paper
Guides.
Note:
• Usually the corrugators should be lowered.
When using thick paper, you do not need to
lower the corrugators.
Note:
• When closing the Paper Receiving Tray, first
slide the Paper Stopper to the edge of the tray
and fold it inward. Then raise the corrugators,
widen the Receiving Tray Paper Guides, and
fold the guides inward. Last close the Paper
Receiving Tray.
To Next Page
Loading...
