3.5. DESCRIPTION OF ACCESSORIES ON REQUEST
To increase the machine performance and versatility, the Manufacturer makes available the following accessories.
− Stain-resistant wheels
Wheels made in a material which reduces the formation of marks on the floor.
− Additional battery kit
it is equipped with a recharging device, two batteries and two trays containing the batteries.
The kit allows replacing the tray containing low batteries with the tray of the charged batteries in order to reduce
the time during which the wrapping activity is stopped.
− Reel shaft
it is designed to use film reels with a core diameter different from the standard one.
− Film carriage "FRD for mesh"
Carriage for pallet wrapping with mesh film.
− Automatic cutting device
it automatically cuts the film at the end of the cycle.
− Black product photocell
its sensitivity level is suitable for detecting also the height of pallets having mostly black surfaces.
− Sliding column (oversized)
they allow wrapping heights up to 2400 mm, 2800 mm and 3100 mm.
− Double feeler (Ø260÷400 mm)
it is suitable for wrapping pallets where the product protrudes from the pallet in an irregular way.
− Feeler with oversized wheel (Ø400 mm)
It is suitable for wrapping pallets having a product which is not compact.
− Film breakage sensor
it detects broken film and empty reel.
− Film carriage with height 750 mm
it allows the use of reels with height 750 mm.
− Lead batteries
− Lithium batteries
− Dry battery
− Gel battery
− R-Connect
− R-Connect with film reading
− Blue light
warning light alerting of the presence of the robot
− Film height adjuster – roping device:
The device has a double function during the wrapping of the packaging, it can be used to adjust the height of
the film (height adjuster) or to tighten the film and form a reinforcement rope for the packaging.
− Kit for -5° temperature.
To Next Page
Loading...
