Robopac ROBOT S7 - 3.8. NOISE LEVEL; 3.9. INSTALLATION ENVIRONMENT CHARACTERISTICS

ENG
TECHNICAL INFORMATION
37
3.8. NOISE LEVEL
The values relating to airborne noise have been detected in compliance with standards:
- EN 415 - 9
Description
A-weighted emission sound
pressure measured level at the
operator’s position (LpA)
Emitted sound power level (Lw)
Operation in working conditions.
64.7 dB (A)
77.5 dB (A)
The use of appropriate protection systems is recommended (earmuffs, ear plugs, etc.).
3.9. INSTALLATION ENVIRONMENT CHARACTERISTICS
The place where the machine is to be installed must be carefully selected taking into account the environment conditions
in order to have correct and risk-free operating conditions.
Therefore we suggest to take into account the following prerequisites:
- An appropriate ambient temperature (see “Technical data”).
- A perimeter area that must be left around the immediate working area, also for safety reasons (see “Perimeter
areas”).
- A flat surface, steady and without vibrations with adequate load bearing capacity, considering also the weight of
palletised loads.
- The area must feature suitable sockets for compressed air and power distribution.
Danger - warning
Using this machine in explosive environments or when exposed to atmospheric agents is strictly forbidden.