Robopac ROBOT S7 - 6.5. MANUAL HANDLING PAGE

ENG
INFORMATION ABOUT THE USE
63
6.5. “MANUAL HANDLING” PAGE
The page displays the controls to activate the film carriage vertical movement in “manual mode”.
A) Button (hold to run): it is used to activate the carriage upstroke.
B) Button (hold to run): it is used to activate the carriage downstroke.
C) Button (hold to run): it is used to activate the roping device upstroke.
D) Button (hold to run): it is used to activate the roping device downstroke.
E) It is used to display the “home” page.