Robopac ROBOT S7 - 7.3. LUBRICATION POINT DIAGRAM

ENG
MAINTENANCE INFORMATION
83
7.3. LUBRICATION POINT DIAGRAM
The diagram shows the main parts concerned by the lubrication interventions and their intervals.
Spread grease over it.
Check the lubricant level.
Do not top up and/or change in life-lubed reduction units and gearmotors.
Important
Observe the lubrication frequency to obtain the best performance and a longer machine’s operating life.
Use lubricants (oils and greases) recommended by the Manufacturer or with similar chemical-physical
features.