Robopac ROBOT S7 - 6.18.BATTERY CHARGER MODE

ENG
INFORMATION ABOUT THE USE
79
6.18. BATTERY CHARGER MODE
When the minimum charging threshold is reached, the machine automatically stops to preserve the battery service life.
The minimum charge threshold is indicated in multiple places:
• On the battery display, with the red flashing bar which is still in the reference icon
• On the LED indicator placed on the machine casing.
The wrapping cycle in progress is completed and then the display shows the alarm “E9001” (low battery).
When this alarm is displayed, you can only move the machine to the charging area.
Important
The battery must be charged in rooms protected against atmospheric agents, well vented and outside
of the work environment.
Follow the instructions carefully.
Use goggles
Smoking is forbidden
Electrolyte is highly corrosive.
In case of contact with electrolyte, wash with plenty of running water and contact the first aid station or
seek medical advice - Refer to the battery specific instructions.