6.10. “HMI SETTINGS” PAGE
The page displays the controls to customise the user interface operating mode.
A) Button: it is used to enable and disable the display acoustic signal.
B) Button: it is used to display the “change password” page .
The function is active only if the system is accessed by a “machine operator” user (see the “enter password
page (user login)”.
C) Button: it is used to enable and disable the recipe programming mode.
The function is active only if the system is accessed by a “machine operator” user (see the “enter password
page (user login)”.
D) Button: it is used to display the page with the software version.
E) Button: it is used to select the language.
F) Button: it is used to display the page for setting date and time.
G) Button: it is used to display the telephone number of the dealer to contact in case technical assistance is
required.
The dealer’s telephone number can be modified only when accessing the system in “assistance service” mode.
To Next Page
Loading...
