SPIROR HP - DR
H) Product winding start time (head).
This is the time that determines the
winding start position relative to the
beginning of the product.
I) Rotating ring and carriers speed
function.
‒ Rotating ring speed function.
To increase or decrease rotating ring
speed; this speeds up or slows down the
process and reduces or increase film
wrap overlaps respectively.
‒ Conveyor speed function.
Increases or decreases speed of the
infeed and outfeed conveyors; this allows
to speed up or slow down operation and
to respectively decrease or increase film
overlapping.
L) Product wrapping time (central
band).
It is the time that determines the
location and quantity of central bands
with respect to product head.
Note
The key (L) is present only in the case of
central band wrapping.
English
To Next Page
Loading...
