Roche Diagnostics
A-100
Operator’s Manual · Version 3.4
4Software Cedex Bio analyzer
Key screens
Cleaner button Press to confirm that you have exchanged the external cleaner bottle.
The cleaner is OK.
The cleaner level is down to 10% or lower. See the % indication.
A fluid sensor detected that there is no cleaner in the analyzer tubing. No new tests
can be processed, started tests may have to be restarted after replacing the bottle.
Workplace tab
The Workp la ce tab leads to information on orders and the corresponding results.
Orders View and handle orders.
Result Review View and validate sample results.
QC Status View and validate active QC results.
QC History View QC results—on individual screens—of the current or the previous calendar
month, or those generated before the previous month.
Calibrations View, validate and delete calibration results.
Lot Data Define and change calibration and QC lot data by reading barcodes or typing the
values.
Loadlist List of tests that are ready to be performed.
Wo r kl i st Information on tubes currently placed on the sample area.
Figure A-61 Workplace tab
To Next Page
Loading...
