Roche Diagnostics
A-12 Operator’s Manual · Version 3.4
1Safety Cedex Bio analyzer
Safety labels on the Cedex Bio analyzer
Safety labels on the Cedex Bio analyzer
List of safety labels on the Cedex Bio analyzer
Warning labels are placed on the analyzer to draw your attention to areas of potential
hazard. Listed below are labels and the definitions according to the location on the
analyzer.
The safety labels on the analyzer comply with the following standards: ANSI Z535,
IEC 61010-1, IEC 60417, ISO 7000, or ISO 15223-1.
In addition to the safety labels on the analyzer, there are safety notes in the
corresponding parts of the user documentation.
The safety messages give more detailed information about potentially hazardous
situations that may arise during daily operation, or when carrying out maintenance
actions.
When working with the system, observe both the safety labels on the system and the
safety messages in the user documentation.
Only Roche Service representative replaces damaged labels. For replacement labels, con-
tact your local Roche representative.
Biohazard
Potentially biohazardous materials are used near this label.
Observe relevant laboratory best practices on safe usage.
Hot surface
The area near this label may be hot.
To avoid burns, do not touch this area.
Liquid waste container
This label is placed on designated liquid waste containers. Liquid
waste containers contain potentially biohazardous materials.
When handling liquid waste containers, observe relevant laboratory
best practices on safe usage. Wear appropriate personal protective
equipment, such as eye protection with eye shields, fluid-resistant
laboratory coat, protective gloves and face shield.
To Next Page
Loading...
Need help?
General
