Roche Diagnostics
Operator’s Manual · Version 3.4 A-107
Cedex Bio analyzer 4Software
Key screens
Display the results in a table.
The results are sorted chronologically, relevant events (QC lot change, reagent set
change, QC target value change) precede the results.
Month button Display the results of the month indicated on the button.
Old Display the results generated before the beginning of the previous month.
Calibrations list
f Workpla ce > Calibrations
U column Use of calibration
CU: Current calibration
SB: Standby calibration
OB: Obsolete calibration
T column Calibration type
L: Lot calibration
S: Set calibration
Status column The date indicates when the results were accepted. If flags were generated for the
result, the flag with the highest priority is displayed. In all other cases, the order status
is displayed.
Print calibration results.
You can choose one of the following options:
o List (If a filter was applied, the list would contain only the results that fulfill the
filter criterion, and the filter criterion would be part of the button name.)
o Detail of Calibration.
Display details of the selected calibration.
Figure A-67 Calibrations list
To Next Page
Loading...
Need help?
General
