Roche Cedex Bio - Optical Safety; Mechanical Safety; Analyzer Covers and Operation; Biohazardous Materials

Roche Diagnostics
A-6 Operator’s Manual · Version 3.4
1Safety Cedex Bio analyzer
Safety information
Optical safety
Mechanical safety
Analyzer covers
Operation and maintenance
Biohazardous materials
WARNING
Loss of sight
The intense light of the LEDs may severely damage you eyes. Do not stare into the LEDs.
Scanning equipment using LED technology is covered by the international standard
EN/IEC 60825-1 LED Safety: Class 1.
WARNING
Personal injury or damage to the analyzer due to contact with analyzer
mechanism
Do not touch moving parts during analyzer operation.
WARNING
Personal injury or damage to the analyzer due to contact with analyzer
mechanism
Keep all covers closed, operate them as instructed on the screen.
WARNING
Personal injury or damage to the analyzer due to contact with analyzer
mechanism
Do not touch any parts of the analyzer other than those specified. During operation and
maintenance of the analyzer, proceed according to the instructions.
WARNING
Infection by biohazardous materials
Contact with samples containing material of human origin may result in infection. All mate-
rials and mechanical components associated with samples of human origin are potentially
biohazardous.
o Be sure to wear protective equipment. Take extra care when working with protective
gloves; these can easily be pierced or cut, which can lead to infection.
o If any biohazardous material is spilled, wipe it up immediately and apply disinfectant.
o If waste solution contacts your skin, wash it off immediately with water and apply a dis-
infectant. Consult a physician.