Roche Cedex Bio User Manual

Roche Diagnostics
Operator’s Manual · Version 3.4 B-9
Cedex Bio analyzer 5 Daily operation
Introduction
Performing an individual
QC measurement
1. Start the wizard. Wo rk p lac e > QC Status >
2. Select a test. n/a
3. Select a control and place the tube.
Repeat until there are no controls left
on the screen.
n/a
4. Start the QC measurement.
5. Validate the QC results. Workplace > QC Status >
6. Remove the control.
Performing all
due QC measurements
1. Start the wizard. Overview > Order >
>
2. Select a control and place the tube.
Repeat until there are no controls left
on the screen.
n/a
3. Start the QC measurement.
4. Validate the QC results. Workplace > QC Status >
5. Remove the controls.
Task Steps Navigation
With wizard As individual steps
Table B-1
Overview of the daily operation tasks (Continued)

Roche Cedex Bio Specifications

General

Brand	Roche
Model	Cedex Bio
Category	Measuring Instruments
Language	English