Roche Diagnostics
Operator’s Manual · Version 3.4 B-47
Cedex Bio analyzer 5 Daily operation
Analyzing samples
If the sample is no longer on the
analyzer
o Do one of the following:
2
Select the tests.
o Press an available test to select it.
o Press a selected test to cancel its selection. (Tests that are already scheduled to
be performed cannot be canceled.)
3
Press to confirm your selection.
If the sample is still on the
analyzer
A message is displayed showing the position the sample is placed on.
o Press to confirm the position
The screen with details on the order and the sample is displayed again.
o Press to close the screen.
If the sample is no longer on the
analyzer
A message is displayed, asking you to place the sample.
o Place the sample on the sample area.
The orders list is displayed again.
4
The system reschedules the order and processes it as normal.
If the Starting point was Perform these steps
Overview > Order A screen is displayed, asking you to scan the sample or
to type its ID manually.
1. Identify the sample either by scanning its barcode
or by typing the sample ID.
If the same barcode was scanned before (during the
current day) or you use the same sample ID as in
the original order, the system recognizes the origi-
nal order and displays its associated information.
2. Press
.
A screen for selecting tests is displayed.
Workplac e > Orders A screen is displayed that lists all orders.
1. Select the order you want to change.
2. Press
.
A screen for selecting tests is displayed.
To Next Page
Loading...
Need help?
General
