Roche Diagnostics
Operator’s Manual · Version 3.4 B-117
Cedex Bio analyzer 6 Special operations
Exporting data
qcs_yyyymmddhhmmss.csv
qch_yyyymmddhhmmss.csv
Column Title Description
Instr Instrument ID (always 30 for Cedex Bio)
Msg Message Type:
7 Result for sample, control, or calibration
Index 161 Data values
App Application code
Date Date when the result was generated
Time Time when the result was calculated
SW-Version Software version installed on the analyzer
Serial Serial number of the analyzer
Ctrl Control ID
User User name ($SYS$ if Auto Accept is on)
Lot Lot ID
Mean Mean value
Result Result value
Unit Defined display unit
Flags Flag name
Rate Rate value calculated in Abs. (First Calculation Point - Last
Calculation Point)
Raw1 - Raw40 Absorbance value of cycle 1 through 40 in Abs. (one cycle = 18 s)
Te st Short name of the application
Ignored "I" if the QC result was ignored
Table 35 Explanations on QC results
Column Title Description
Instr Instrument ID (always 30 for Cedex Bio)
Msg Message Type:
8 QC history result
Index 151 Data values
App Application code
Date Date when the result was calculated
Time Time when the result was calculated
SW-Version Software version installed on the analyzer
Serial Serial number of the analyzer
Ctrl Control ID
User User name ($SYS$ if Auto Accept is on)
Lot Lot ID
Mean Mean value
Result Result value
Unit Defined display unit
Flags Flag name
SD Standard deviation
Te st Short name of the application
Ignored "I" if the QC result was ignored
Table 36 Explanations on QC history results
To Next Page
Loading...
Need help?
General
