2-2 Installation
1560D-UM051D-EN-P – February 2005
General Precautions In addition to the precautions listed throughout this manual, the following
statements, which are general to the system, must be read and understood.
The controller contains ESD (electrostatic discharge)
sensitive parts and assemblies. Static control precautions
are required when installing testing, servicing, or
repairing the assembly. Component damage may result
if ESD control procedures are not followed. If you are
not familiar with static control procedures, refer to
applicable ESD protection handbooks.
An incorrectly applied or installed controller can damage
components or reduce product life. Wiring or application
errors, such as undersizing the motor, incorrect or
inadequate AC supply, or excessive ambient temperatures,
may result in malfunction of the system.
Only personnel familiar with the controller and
associated machinery should plan or implement the
installation, start-up, and subsequent maintenance of the
system. Failure to do this may result in personal injury
and/or equipment damage.
Transportation and Handling The controller must be transported on a pallet or via use of the lifting
angles supplied as part of all 90-inch high cabinets or frame units.
Ensure that the load rating of the lifting device is
sufficient to safely raise the controller sections. Failure
to do so may result in severe injury and/or equipment
damage. Refer to the packing slip enclosed with shipment
for shipping weights.
Round rollers can be used to assist in moving the controller to the instal-
lation site. Once at the final site, the pipe rolling technique can be used to
place the cabinet in the desired position.
Care must be exercised when using either a forklift, or the
pipe rolling technique, for positioning purposes to ensure
that the equipment is not scratched, dented or damaged in
any manner. Always exercise care to stabilize the
controller during handling to guard against tipping and
injury to personnel.
A T T E N T I O NA T T E N T I O N
A T T E N T I O NA T T E N T I O N
A T T E N T I O NA T T E N T I O N
A T T E N T I O NA T T E N T I O N
A T T E N T I O NA T T E N T I O N
To Next Page
Loading...
Need help?
General
