Maintenance
Preventive Maintenance
114 MagneMotion
Rockwell Automation Publication MMI-UM013B-EN-P - April 2020
Preventive Maintenance
The motors, node controllers, and power supplies of the MagneMotion transport system are
self-contained components that are designed for use in a clean, inert environment, and require
no maintenance other than that described here. Any deviation from this basic environment can
affect the maintenance requirements, contact ICT Customer Support for additional informa-
tion. See Troubleshooting on page 116 if any problems are detected.
Table 6-1: Preventive Maintenance Schedule
Component Maintenance Action Frequency
*
* The specified frequency is based on a certified clean, inert environment. Adjust the facility Preventative Main-
tenance Schedule to account for any deviations from this environment.
Page #
Node Controllers Transfer Log Files 3 months or
as required
115
To Next Page
Loading...
