Rockwell Automation MagneMotion 700-0871-00 - NC-S Rack Mounting Bracket; NC-S Rack Mounting Bracket Mechanical Drawing

Specifications and Site Requirements
Mechanical Specifications
56 MagneMotion
Rockwell Automation Publication MMI-UM013B-EN-P - April 2020
NC-S Rack Mounting Bracket
The 1U rack mounting brackets can be used for mounting the NC-S node controller in a stan-
dard 19 in electronics rack.
Figure 4-3: NC-S Rack Mounting Bracket Mechanical Drawing
NOTE: Contact ICT Customer Support for current detail drawings.
Exposed Materials
• 5052-H32 Aluminum.
• Epoxy powder coat paint.
All Dimensions in Millimeters [Inches]
[0.394]
10.00
[0.081]
2.06
[6.693]
170.00
[1.150]
29.20
[0.360]
9.14
[2.756]
70.00
[2.756]
70.00
THK
[0.217]
5.50
[3.835]
97.41
[1.701]
43.20
[1.250]
31.75
3X
[0.378 X 0.260]
9.60 X 6.60
2X
[0.575]
14.60
3X
[0.362]
9.20
2X