Rockwell Automation MagneMotion 700-0871-00 - NC-12 Node Controller, M12 Ethernet

Specifications and Site Requirements
Mechanical Specifications
Node Controller Hardware User Manual 59
Rockwell Automation Publication MMI-UM013B-EN-P - April 2020
NC-12 Node Controller, M12 Ethernet
Figure 4-6: NC-12 Node Controller Mechanical Drawing, M12 Ethernet
NOTE: A minimum of 50% of each vent must be clear for unobstructed airflow.
A mounting kit is available for standard 19 in electronics racks (see NC-12 Rack
Mounting Bracket on page 61).
Ingress Protection Rating: IP20.
See NC-12 Node Controller on page 72 for the electrical specifications.
Contact ICT Customer Support for current detail drawings.
Exposed Materials
The node controller provides openings for airflow and must not be installed where harsh con-
ditions exist.
All Dimensions in Millimeters [Inches]Weight: 3.6 kg [8 lb]
700-1573-00
4X .250 UNC-2B .310
[8.18]
207.7
[7.00]
177.8
[0.77]
19.50
[3.44]
87.3
[2.5]
63.5
[2.5]
63.5
[2.5]
63.5
[8.75]
222.3
[0.62]
15.6
[1.34]
33.9
[4.34]
110.2
[0.12]
3.10
[9.98]
253.5
[10.2]
260.0
[0.8]
20
[2.4]
60