Maintenance
Repair
120 MagneMotion
Rockwell Automation Publication MMI-UM013B-EN-P - April 2020
Repair
If a component of the MagneMover LITE transport system malfunctions, see Troubleshooting
on page 116 in this manual for diagnostic procedures. If these procedures are not adequate to
determine the source of the problem, see Contact ICT Customer Support on page 119. Once
the failed unit has been identified, a replacement unit can be ordered and installed as directed
in Installation on page 85.
NOTE: The components of the MagneMover LITE transport system are designed for easy
replacement. Motors, controllers, and other modules do not contain any user service-
able parts.
NOTICE
Only a qualified service representative can service the components of the
MagneMover LITE transport system. Any attempt to open the transport sys-
tem modules by anyone other than a qualified MagneMotion service repre-
sentative voids the warranty.
Table 6-5: MagneMover LITE Repair Procedures
Component Maintenance Action Page #
NC-S Node Controller Upgrading Node Controllers 121
To Next Page
Loading...
