Specifications and Site Requirements
Mechanical Specifications
54 MagneMotion
Rockwell Automation Publication MMI-UM013B-EN-P - April 2020
Mechanical Specifications
All drawings within this manual are generic and may not reflect specific configurations of the
node controllers. To obtain current drawings, contact ICT Customer Support.
NC-S Node Controller
Figure 4-1: NC-S Node Controller Mechanical Drawing
NOTE: Mounting kits for surface mounting, 19 inch rack mounting, and DIN rail mounting
are available.
Ingress Protection Rating: Designed for IP20.
See NC-S Node Controller on page 64 for the electrical specifications.
Contact ICT Customer Support for current detail drawings.
Exposed Materials
The node controller has unprotected openings and must not be installed in locations where
harsh conditions exist.
All Dimensions in Millimeters [Inches]Weight: 1.95 kg [4.3 lb]
CON SOL E N ET 0
NODE CONTROLLER-S
NET 1 NET 2
1234
POWER
5678
[7.74]
196.5
[7.27]
184.6
[3.9]
100
[11.4]
289
[11.37]
288.8
[11.49]
291.9
[1.71]
43.5
CABLE CON N ECTOR
EXCL U SI O N AREA
To Next Page
Loading...
