Specifications and Site Requirements
Mechanical Specifications
Node Controller Hardware User Manual 61
Rockwell Automation Publication MMI-UM013B-EN-P - April 2020
NC-12 Rack Mounting Bracket
The 2U rack mounting brackets can be used for mounting the NC-12 node controller in a stan-
dard 19 in electronics rack.
Figure 4-8: NC-12 Rack Mounting Bracket Mechanical Drawing
NOTE: Contact ICT Customer Support for current detail drawings.
Exposed Materials
• Carbon Steel.
• 1018 Steel.
• Anodized Aluminum.
All Dimensions in Millimeters [Inches]
3.3
[0.13]
114.5
[4.51]
7.1
[0.28]
25.4
[1.00]
86.9
[3.42]
50.8
[2.00]
To Next Page
Loading...
