Rockwell Automation MagneMotion 700-0871-00 - Electronics Mounting Plate; Electronics Mounting Plate Mechanical Drawing

Specifications and Site Requirements
Mechanical Specifications
Node Controller Hardware User Manual 63
Rockwell Automation Publication MMI-UM013B-EN-P - April 2020
Electronics Mounting Plate
The Electronics Mounting Plate can be used for mounting the NC LITE, the SYNC IT con-
troller, and Ethernet Switches.
Figure 4-10: Electronics Mounting Plate Mechanical Drawing
NOTE: Contact ICT Customer Support for current detail drawings.
Exposed Materials
• 5052-H32 Aluminum.
• 300 Series Stainless Steel.
• A-286 Hardened Stainless Steel.
All Dimensions in Millimeters [Inches]
0
0
28.18
1.11
91.18
3.59
97.93
3.86
153.18
6.03
208.42
8.21
215.18
8.47
278.18
10.95
13.00
.51
75.00
2.95
101.74
4.01
137.00
5.39
5.91
150.00
2X 10.00[0.39]
4X M5 THRU2X M4 THRU
M5 X 12 MM STUD
TYP3.2R
306.35
12.06
2.68
68.18
6.69
170.0015.00
.59
3.2
.13