Rohde & Schwarz CMW500 - Page 150

Remote Control
R&S
®
CMW500
134User Manual 1173.9463.02 ─ 06
Generator, measurement, and signaling applications are termed "firmware applications"
(FWA). In the remote control commands, the FWA is addressed by the second and third-
level mnemonics; see General Command Structure. A possible numeric suffix <i> (short
for <instance>) behind the FWA mnemonics distinguishes several FWAs of the same
type.
See also Sub-Instruments.
The following table provides examples of FWAs of the R&S CMW500 and their mne-
monics:
Firmware Application Description
BLUetooth:MEASurement<i> Bluetooth network standard, measurements
CDMA:GENerator<i> CDMA2000 network standard, generator
CDMA:MEASurement<i> CDMA2000 network standard, measurements
CDMA:SIGNaling<i> CDMA2000 network standard, signaling
DATA:MEASurement<i> Data application unit, measurements
FMSTereo:MEASurement<i> FM-modulated RF signals, measurements
EVDO:MEASurement<i> 1xEV-DO network standard, measurements
EVDO:SIGNaling<i> 1xEV-DO network standard, signaling
GPRF:GENerator<i> RF general purpose application, generator
GPRF:MEASurement<i> RF general purpose application, measurements
GSM:GENerator<i> GSM network standard, generator
GSM:MEASurement<i> GSM network standard, measurements
GSM:SIGNaling<i> GSM network standard, signaling
LTE:MEASurement<i> LTE network standard, measurements
LTE:SIGNaling<i> LTE network standard, signaling
TDSCdma:MEASurement<i> TD-SCDMA network standard, measurements
WCDMa:GENerator<i> WCDMA network standard, generator
WCDMa:MEASurement<i> WCDMA network standard, measurements
WCDMa:SIGNaling<i> WCDMA network standard, signaling
WIMax:MEASurement<i> WiMAX network standard, measurements
WIMax:SIGNaling<i> WiMAX network standard, signaling
WLAN:MEASurement<i> WLAN network standard, measurements
WLAN:SIGNaling<i> WLAN network standard, signaling
R&S CMW Command Structure